Brand Name : Focus Infra or OEM
Model Number : 0.5*35MM
Place of Origin : China
MOQ : 10000pcs
Price : Negotiable
Payment Terms : T/T
Supply Ability : 3000000pcs per month
Delivery Time : 15 days
Packaging Details : 50pcs/bag
Product name : 35m Length Micro Transparent CWDM DWDM Fiber Splice Heat Shrink Tube
Use : Fiber Fusion Splicing Protection
Brand : Focus Infra
Material : Heat Shrink Tube, Stainless Steel Rod, Fusion Tube
Application : optical fiber fusion splicing, protecting optical fiber cable
Fit for : CWDM, DWDM or more smaller application
Length : 35mm
Diamter Of Steel Rod : 0.5 mm
Diameter after shrink : 1.4 mm
Steel Rod Pin : 1
Color : Clear
Operating Temperation : -45°C to +120°C
Pack : 100pcs/bag or 200pcs/bag
35m Length Micro Transparent CWDM DWDM Fiber Splice Heat Shrink Tube
Description:
35m Length Micro Transparent CWDM DWDM Fiber Splice Heat Shrink Tube is designed for 250μm bare fiber splicing protection. Length is 35mm only, it is special used in smaller application, such as CWDM, DWDM ect. 35m Length Micro Transparent CWDM DWDM Fiber Splice Heat Shrink Tube is commonly known as an optical fiber heat shrink protect sleeve. 35m Length Micro Transparent CWDM DWDM Fiber Splice Heat Shrink Tube is widely used in communication optical fiber splicing projects, it is consisted of a special cross-linked polyolefin, a hot melt tube and a strengthen member.
35m Length Micro Transparent CWDM DWDM Fiber Splice Heat Shrink Tube is consist of 304 Stainless Steel Rod and EVA tubings. Its diameter is only about 1.4mm after shrink.
35m Length Micro Transparent CWDM DWDM Fiber Splice Heat Shrink Tube was developed to protect and strengthen fusion splices on fiber optic cables. We must be installed on the optical fiber before fiber fusion (otherwise, you will have to break the optical fiber and start again). First, slide the Fiber Optic Splice Sleeve onto the optical fiber. Then weld the two optical fibers. After the welding is completed, slide the sleeve onto the optical fiber fusion point and cover the connect point and the exposed optical fiber. Put the protective sleeve into the protective sleeve oven built in the welding machine. There, the Fiber Optic Splice Sleeve is heated to melt and contract around the joint. Because the Fiber Optic Splice Sleeve has steel rods, a mechanical protection is formed to prevent the fiber from bending. The contraction of the tube around the optical fiber also forms an environmental protection to keep the element away from the connector.
Features:
1. High transparent fiber fusion splicing heat shrinkable tube
2. 0.5mm thick high quality stainless steel
3. 35mm non-stick inner wall, fast welding
4. No air bubbles, no fiber breakage
5. Quality assurance, both single and double needles
6. Quickly shrink, improving work efficiency
7. extend the service life of the fiber
8. No air bubbles, no fiber breakage
Technical Parameters:
Specification | Test method | Typical data |
Tensile strength(MPa) | ASTM D 2671 | 18 |
Elongation at Break (%) | ASTM D 2671 | 700 |
Density(g/cm2) | ISO R1183D | 0.94 |
Dielectric strength (KV/mm) | IEC 243 | 20 |
Permittivity | IEC 243 | 2.5 |
Length rate of change (%) | ASTM D 2671 | +5 |
35mm Ribbon Fiber Splice Sleeve CWDM DWDM Fiber Heat Shrink 250um Images |